What happens at each step, and what record it leaves.
At First Speed a returned unit goes through seven steps: intake and record, inspection and evidence, plan approval, repair, re-inspection, report delivery, and release. Every step is written into that unit's own record. No work starts without your approval.
A record is opened as soon as the unit arrives. Each unit gets its own unit number and a 4 × 6 inch barcode label. We note its dimensions and weight, photograph the packaging and markings, and place it in a registered location. From then on, every step starts with scanning that label.
If the model cannot be identified right away, we still receive, photograph and store the unit, mark it as unidentified, and pass it to an engineer.
An engineer checks appearance and function point by point and writes up the findings and a recommendation. The photos taken during inspection are kept in the same record as the findings.
The engineer proposes a plan that lists each item: what will be done, how many, and the cost. A unit can be handled in three ways: repair, refurbishment or disposal.
We send the plan to the email address you nominate. You can approve all of it, approve some items, ask for changes, or decline. Every revision is saved as a new version and the original is always kept.
No work starts before approval, except for items you have agreed in advance that we may handle directly. Units you decline are returned as they are, or handled as you instruct.
We carry out the items you approved. Every part used and every step completed is logged, with photos of the finished work.
You can send parts to the warehouse. Each part's receipt, use and return is recorded.
When the work is done we inspect the unit again, with a second colleague present as witness. Only units that pass get a completion report; those that fail go back for rework.
After the unit passes, the report and photos are synced to an online sheet we set up for you. The sheet is open only to the email addresses you authorize.
In the sheet you can see, for each unit, the inspection findings, photos, every version of the plan, the work log, the re-inspection result and the completion report. A separate guide covers what an inspection report should contain.
The repaired unit is shelved until you give release instructions. It leaves on a pallet pickup or by parcel carrier.
Recommendation, approval, execution and completion are four different things. We record them separately, and one never stands in for another. What the engineer recommended, which version you approved, what was actually done and whether the unit passed re-inspection can each be looked up later.
We designed this process ourselves, and we built Serova, the system that records it, around the process.
First Speed is a product inspection and repair warehouse in Ontario, California. We inspect, repair, refurbish and re-inspect high-value and oversized returns for brands and e-commerce sellers, with every step recorded in Serova, our in-house system. For a quote, send your returns list to [email protected].
Tell us the category, the quantity and what's wrong, and we'll reply with a quote.